Concepto de diseño
MIC Splitter 1×3 is a fully passive microphone-level audio splitter that requires no external power. High-quality audio transformers split a single mono microphone signal into three balanced outputs, allowing the same microphone signal to be distributed to three devices simultaneously. Two transformer-isolated outputs help eliminate hum and noise caused by ground loops. Each isolated XLR output features an individual GND LIFT switch for additional noise suppression.
Características
- Distributes one microphone signal to three devices simultaneously
- Audio isolation transformers optimized for microphone-level signals
- Switchable –15 dB input PAD
- Helps eliminate hum and noise caused by ground potential differences and ground loops
- High-quality audio transformers ensure highly linear signal reproduction
- Individual GND LIFT switches on the isolated outputs help eliminate ground-loop noise
- Supports 48 V phantom power pass-through via the THRU OUT for condenser microphones
Especificaciones
| Item Code: | MSX3 |
| Respuesta en frecuencia: | 20 Hz ~ 20 kHz ( + 0dB / -2 dB ) |
| Rango dinámico: | 140 dB |
| Distorsión armónica total: | 0.0005% @ 1 kHz |
| Desviación de fase: | 0.7° @ 100 Hz; 2.8° @ 20 Hz |
| Impedancia de entrada: | Source dependent |
| Output Impedance | Source dependent |
| Maximum Input: | +25 dBu @ 1 kHz |
