Concepto de diseño
Line Splitter 1×3 is a fully passive line-level audio splitter that requires no external power. High-quality audio transformers split a single mono line-level signal into three balanced outputs, allowing the same signal to be distributed to three devices simultaneously. Two transformer-isolated outputs help eliminate hum and noise caused by ground loops, while all three XLR outputs feature individual GND LIFT switches for additional noise suppression. The COMBO input accepts XLR, TRS, and TS connectors, providing flexible connectivity with a wide range of professional audio equipment.
Características
- Distributes one line-level audio signal to three devices simultaneously
- Switchable –12 dB input PAD
- Helps eliminate hum and noise caused by ground potential differences and ground loops
- Audio isolation transformers optimized for line-level signal impedance
- COMBO input accepts XLR, TRS, and TS connectors for broad compatibility with professional audio equipment
- High-quality audio transformers ensure highly linear signal reproduction
- Individual GND LIFT switches on all outputs help eliminate ground-loop noise
Especificaciones
| Item Code: | LSX3 |
| Respuesta en frecuencia: | 20 Hz – 20 kHz (± 0.5 dB) |
| Gain: | -1.5 dBu |
| Desviación de fase: | +0.6° @ 20 Hz |
| Impedancia de entrada: | 712 Ω |
| Impedancia de salida: | 112 Ω |
| Common Mode Rejection Ratio: | 105 dB @ 60Hz, 70 dB @3 kHz |
| Nivel de ruido: | -120 dBu |
| Maximum Input: | +20 dBu |
